Home > Product Info > Portable ECG Monitoring > CARDIOMETER CU-PH1
CARDIOMETER CU-PH1
CARDIOMETER CU-PH1
Cardiometer CUI-PH1 - this is a battery-powered, lightweight ECG monitor with a liquid crystal display. At 230 grams, it is one of the lightest ECG monitors on the market.
1.Power indicator
Green LED, lit when the device is ON.
2.Power switch
Used to turn the device ON or OFF
3.Alarm LED
Red LED, flashes when the device detects an ECG signal with beat rate that is beyond the normal range defined by the user.
4.LCD display
Displays the following: a. ECG signal acquired from the patient b. ECG signal recorded in the memory of the device c. Menu d. Divice settings
5.Left arrow button
Used to scroll the menu highlight to the right or downward. this button is also used to turn the QRS beeper ON or OFF
6.Menu button
used to activate the menu. when the menu is activated, it is used to select the highlighted menu item
7.Right arrow button
Used to scroll the menu highlight to the left or upward. This button is also used to change the Lead of the ECG signal being acquired.
Highly Portable
The device weighs only 230 g (including the 2 AAA batteries). The user has the choice between chest and hand electrodes. When the hand electrodes are used, the device is capable of acquiring and displaying Lead I ECG only.
Multiple Lead Capabilities
When the chest electrodes are used, the device can acquire and display Lead I, or II, or III. The switching is done via an internal analog signal multiplexer, thus, there is no need to move the electrodes when switching between leads.
Abnormal Heart Rate Alarm
The device can be set to give off an alarm when the detected heart rate is beyond the limits defined by the user.
ECG Data Recording
The ECG data acquired from the patient is automatically recorded in the internal flash memory of the device. This record can be subsequently downloaded to a personal computer using the CU-EX1 data management software from CU Medical Systems, Inc. A total of 600 minutes of ECG record can be stored in the device’s nonvolatile internal flash memory.
Heart Rate Trend
The device calculates the average heart rate of the acquired ECG every minute and displays the result in a heart rate trend graph.
- Easy to operate on your palm and to keep in your pocket
- ECG monitoring (3 Lead ECG)
- Data storage and management system
+ Recording time : 600 minutes + Data communication : UART, IrDA
- Display
+ Sweep speed : 25mm/sec, nominal + Viewing time : 3.2 seconds + Backlight : Can be turned ON or OFF + QRS Beeping : Can be turned ON or OFF + Screen Information : ECG, Heart rate, Current lead, Elapsed time, Status of battery, Alarm and recording
▒ ECG
▒ Data Control
* Lead Ⅰ,Ⅱ,Ⅲ with 3 Cable Electrodes
* Lead I with hand electrodes
* Bandwidth : 0.3 to 40 Hz : Digital Notch Filter at 50/60 Hz
* ECG Vertical Scales : 5 mm/mV, 10 mm/mV, 20 mm/mV, and AUTO
* ECG Sweep speed : 25 mm/s
* ECG Heart Rate : 30 ? 300 bpm
* CMRR : > 90dB
* DC offset correction : ± 300 mV
* Sample resolution : 200 samples / sec, 12 bits
* Recording Time : max 60 minutes per partition, 10 partitions, total of 600 minutes
* Data Recorded : ECG Waveform
* Data communication : IrDA
▒ Safety Standards
* IEC 601-1, IEC 601-2-25
* MDD 93/42/EEC Annex Ⅳ Class Ⅱa Type BF
* Defibrillator Protection when used with 3 Cable Electrodes
▒ Display
* LCD resolution : 320 × 240 pixel
* Viewing Area : 76 mm × 57 mm
* Backlight : Can be turned ON or OFF or Automatic ON for 5 seconds when any key is pressed
* QRS Beeping : Can be turned ON or OFF
* Screen Information : Heart Rate, Current Lead, Beep Alarm, Low Battery Alarm
▒ Power
* 1.5 V × 2 AAA LR03 type alkaline batteries
▒ Physical
* Length : 133 mm
* Width : 108 mm
* Thickness : 22 mm
* Weight : 230 g excluding electrode assembly, including batteries
Home > Product Info > Portable ECG Monitoring > CARDIOMETER CU-PH1
Highly Portable
