Home > Product Info > Defibrillators > PARAMEDIC CU-ER2
PARAMEDIC CU-ER2
PARAMEDIC CU-ER2
Paramedic CU-ER2 - this is an easy to use defibrillator with AED and manual modes. In AED mode, it runs in the same way as the Paramedic CU-ER1. In manual mode, the user does the analysis of the victim’s ECG and sets the energy output of the device. The energy output may be set from 2 Joules to 200 Joules. It is intended for use by emergency first responders.
Dual Mode Defibrillator
The Paramedic CU-ER2 is a portable external defibrillator with the following modes:
Automated External Defibrillation (AED) Mode
Manual Mode
In AED Mode, the Paramedic CU-ER2 analyzes the ECG of the patient to determine whether the patient has a shockable or nonshockable ECG rhythm. In this mode, the Paramedic CU-ER2 provides you with voice and text prompts throughout a rescue operation.
In Manual Mode, the Paramedic CU-ER2 lets you control the defibrillation process. You assess the ECG of the patient and set the energy of the shock to be delivered. In this mode, the operator has the freedom to set the energy level of the defibrillating shock. The choices are (in Joules) 2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200. You may also perform synchronous cardioversion for the treatment of atrial fibrillation in this mode. In synchronous cardioversion, the defibrillating shock is delivered within 60 milliseconds of the occurrence of a QRS peak in the patient’s ECG.
ECG monitoring (3 Lead ECG cable)
The Paramedic CU-ER2 may also be used to do ECG monitoring only when it is in Manual mode. ECG monitoring only is done by connecting the custom designed ECG monitoring cable assembly from CU Medical Systems, Inc. No shocks may be delivered when the ECG monitoring cable assembly is connected to the Paramedic CU-ER2.
Intelligent Data Management System
The Paramedic CU-ER2 automatically records ECG and events such as shock deliveries in nonvolatile memory during rescue operations. These data may be printed directly using a portable printer or downloaded to a personal computer for printing and archiving.
Versatile Power Supply
The Paramedic CU-ER2 is powered by an internal rechargeable Nickel Metal Hydride battery pack. It may also be powered by an optional external disposable LiMnO2 battery pack or its AC/DC adapter. While the internal battery is being recharged by the AC/DC adapter, the AC/DC adapter also supplies power to the whole device which enables it to be fully functional.
Automatic and operator initiated Self-Test
The Paramedic CU-ER2 is easy to troubleshoot and maintain. It is programmed to conduct automatic Power On, Run Time, Daily, Weekly, and Monthly self tests. During these tests, the critical subsystems of the device are tested for functionality. If a fault is detected, the device informs you of the fault through audible and visible indicators.
- Manual and AED Operation
- Synchronized cardioversion
- Efficient and effective e-cube Biphasic technology (BTE Type)
Electroluminescent back lit Liquid Crystal Display for ECG waveform and Plethysmographic wave, text prompts, Alarm indicators, and Menu Operation Display
Armed Indicators
“Charging complete” text prompt Continuous tone on beeper Flashing red backlight of the SHOCK button
Energy Choose
Mode/Energy Choose Knob
Charge Control
ANALYZE/CHARGE Button
Shock Control
SHOCK button
Synchronizer
SYNC message appears on the LCD Audible beep when R-wave is detected Tick mark R-wave marker on the LCD screen Shock is delivered within 60 ms of an R-wave occurrence
AED Mode
AED Energy Profile
Fixed energy at 150 Joules
Text and Voice Prompts
Provided to user in every step of a rescue operation
AED Controls
Power On/Off, Pause/Disarm, Analyze/Stop Analysis, Pause/Resume, SHOCK, Volume control
Indicators
Electroluminescentback lit Liquid Crystal Display for ECG waveform and Plethysmographic wave, text prompts, and Alarm indicators.
Armed Indicators
“Charging complete” text prompt Continuous tone on beeper Flashing red backlight of the SHOCK button
Patient Analysis
>Detects and evaluates connection impedance for proper defibrillator electrode pads contact. Analyzes patient’s ECG to determine if a shock is necessary.
Shockable rhythms
Ventricular fibrillation and ventricular tachycardia with rates > 150 bpm
Sensitivity and Specificity
Meets AAMI guidelines
ECG Monitoring Mode
Inputs
Single channel ECG may be viewed on LCD and printed. Lead II ECG is acquired using a 3-wire ECG cable and connector assembly
Lead Fault
“CHECK PADS” prompt and dashed line on BPM value are displayed when the ECG cable and connector assembly is disconnected from the ECG-DEFIB port.
Heart Rate Display
Digital readout display from 30 to 300 bpm with an accuracy of ±2 %
Heart Rate Alarm
You may set the lower and upper limits with the following values Lower limit: from 30 to 299 bpm Upper limit: from 31 to 300 bpm
ECG Cable Length
3 meters
Common mode rejection
Greater than 90 dB measured per AAMI EC 13
ECG size
5 mm/mV 10 mm/mV 20 mm/mV AUTO : 0.3 to 1 mV signals are displayed with 10mm/mV gain, outside of that range, the peak to peak value is displayed as 10 mm on the LCD display)
Frequency Response
ECG Monitoring Mode: 0.3 to 40 Hz (-3 dB) AED and MANUAL modes (EMS): 1 Hz to 30 Hz
Patient Isolation (Defibrillation Proof)
BF for all modes
Event Storage
Internal Flash Memory
12 hours of event and ECG recording
SmartMedia Card (32MB):
>42 hours of event and ECG recording or 1 hour if voice recording is enabled
ECG Record Printing
May be printed directly from the Paramedic CU-ER3 using a portable thermal printer. May also be printed using a personal computer by downloading the data to the PC using the data management software from CU Medical Systems, Inc. (CU Expert)
External Links
UART Port
IrDA Port
Display
Type
Liquid Crystal Display with electroluminescent backlight
Size
4inches (10.16 cm) diagonal
Resolution
320X240 pixels
Sweep speed
25mm/s nominal, stationary trace, sweeping erase bar
Home > Product Info > Defibrillators > PARAMEDIC CU-ER2
Dual Mode Defibrillator
